Our preference in most cases is to be supplied with a high resolution (300dpi) PDF file with full bleed. Below is further detail on our general requirements. However, if you need help please call us or email us as we’re happy to help.
Correct Preparation of PDF Files
When creating a PDF in Acrobat Distiller, there are job options which must be set for commercial printing. These include default resolution,compression settings and font embedding. Where possible ensure a 300dpi PDFx1a ‘print’ or ‘press ready’ PDF is outputted. Please include a 3mm bleed, crop marks and supply as single pages.
Please ensure you choose high resolution. Compression settings for colour and greyscale should be down sampled to 300dpi with “auto compression” set on high. Bitmapped (monochrome: i.e. line art) images should be set at 600dpi. Font embedding should be set to “embed all fonts.”
One of the most important elements in artwork for printing! Please ensure there is 3mm bleed all round the PDF, i.e. save the PDF with 6mm added to each measurement (i.e. for A4 usually 210mm x 297mm, save as 216mm x 303mm). Crop marks may be included if you wish. If your artwork is supplied without bleed we may not always be able to add it on for you and you may have to amend and re-supply the artwork.
CMYK not RGB Please!
Please ensure that all embedded images are CMYK (Cyan, Magenta, Yellow, Black) files. RGB images may look good on your screen but final output to print is always in CMYK. One should be aware that files converted from RGB to CMYK may alter the colour composition significantly!
Microsoft Office Files
If you are creating a PDF from a MS Publisher or Word file, care must be taken to ensure spot colours are created correctly in your original documents. Do not set to RGB (Red, Green, Blue) colours as they cannot be printed as such.
Supplying EPS Files
Any other file formats not listed above must be saved as an eps or jpeg. If there are any changes to the job, you may have to amend and re-submit the artwork as we may be unable to change it. Ensure your files have bleed and crop marks and please confirm the final size of the artwork and supply a hard copy for reference.
Bleed and Crop Marks
All artwork must have 3mm bleed if you require the image to bleed off the edge of the paper.
Crop marks should be included if artwork does not fill a whole page area (i.e. no bleed). They should be 5mm long, 3mm outside of the page area and coloured in the colour ‘registration’ to ensure they appear on each colour separation.
Please ensure that artwork is supplied at the correct finished size required. If this is not possible, please inform us to allow time for amending the artwork.
Artwork Amendments or Re-submission
Our prices include “pre-flight checking” your artwork and submitting a PDF proof for your approval. We will correct any easy to rectify issues that we spot as part of this process – free of charge.
If we need to amend your artwork or you need to re-submit corrected files to us there may be an additional charge which includes te cost of an additional PDF proof. More extensive amending or correcting is charged dependent upon the amount of time required to rectify.
Please do not supply imposed pages or “printers pairs” because our workflow includes imposition software to impose correctly for our printing processes.
If you are supplying a document with multiple pages, please try and make the front and back cover of the document a separate file, and supply as single pages in page order. Also, please remember to allow for “creep” – we suggest you keep all text and copy at least 5mm away from the trimmed edge.
Include all fonts you have used in the file. Whilst we have an extensive font collection, there is no guarantee the version you have used matches ours. This can create problems with line lengths and spacing of the type.
At Rapidity we assume that all the fonts supplied are licensed and takes no responsibility for embedded fonts.
If you have any questions please get in touch today.